28

2022

-

11

Carton machinery manufacturers talk about what they need to know before buying carton machinery.


Carton machinery manufacturers: carton mechanical control system maintenance methods 1. central control room, electrical cabinet and power distribution cabinet maintenance and management. Lock the doors of the central control room, electrical cabinet and power distribution cabinet; close all wiring holes (pits) that may introduce dust, moisture, rodents or other insects, prevent the site paper dust from entering the control room, and keep the control room clean;

  Carton machinery manufacturersWhat do you need to know before buying carton machinery?

Carton machinery manufacturer: maintenance method of carton machinery control system

1. Maintenance and management of central control room, electrical cabinet and distribution cabinet.

Lock the doors of the central control room, electrical cabinet and distribution cabinet;

Seal all routing holes (pits) that may introduce dust, moisture, rodents or other insects, prevent the site paper dust from entering the control room, and keep the control room clean;

WithoutCarton machinery manufacturersApproval, unauthorized modification, disassembly and replacement of system components are strictly prohibited, and other electrical equipment shall not be overlapped in the electrical cabinet;

Do not disassemble the control cable, grounding wire, power cord, communication cable and other cables for no reason. If the cable needs to be disassembled for equipment maintenance, it is necessary to keep the identification intact and restore the cable to ensure reliable wiring;

25094309-61d7-4f91-a034-fe1455979dd6.jpg

Carton machinery manufacturers

After one month of operation of the new equipment and half a year of operation of the equipment, check and tighten all kinds of terminals in all aspects.

2. Maintenance and management of operation station

Civilized operation, take good care of equipment, keep clean, dustproof and waterproof, weekly power failure, purging and maintenance, including dust cleaning inside industrial computers;

It is strictly prohibited to use software not provided by Jingshan Light Machine on industrial control computers (computers), PLC, HMI and various controllers, and use U disks carefully to prevent virus invasion;

Make all kinds of PC software and data backup required by the system;

During long-term shutdown, continuously energize the PLC, HMI and controller with program for more than 8 hours per week to ensure that the program or data will not be lost due to long-term power failure.

3. Maintenance and management of cooling system

Check and clean up the paper scraps, grease and other impurities on the cooling fan of the air-cooled motor in each shift to ensure that the cooling fan operates normally and has good heat dissipation;

The water-cooled motor cooling system has normal water temperature and flow, no blockage, no pipeline leakage, and ensures the normal operation and good heat dissipation of the cooling system;

Ensure the stable operation of air conditioning equipment in the control room and electrical cabinet, prevent condensate from flowing into the cabinet, ensure that the temperature change in the room (cabinet) is less than 5/h, and avoid hardware damage, system failure and even fire caused by short circuit caused by condensation on system equipment due to rapid changes in temperature and humidity;

By braking the paper clip cooling fan, check and clean up the paper scraps, dust, grease and other impurities to ensure that the cooling fan operates normally and has good heat dissipation.

Carton machinery manufacturers tell you the problems that carton factories should pay attention to after the introduction of carton machinery and equipment.

1. Check whether there is debris in the carton machinery and equipment, and use an air gun to clean up the debris and dust left by it.

2. Check whether the various parts of the carton machinery and equipment have been lubricated in place.

3. Start the carton machinery and equipment to observe whether there is abnormal noise, severe vibration, peculiar smell, etc.

After all carton machinery and equipment are tested normally, trial production can be started. Friends who do not know about the new carton factory can directly find the leaders of the carton machinery factory for testing.

Well, todayCarton machinery manufacturersXiao Bian will talk about it first. Thank you for watching.


Keywords: printing machine