Paper feeding department

☆ The leading edge paper feeding increases the air suction flow, and the paper feeding is more stable and accurate. The frequency conversion controls the vacuum airflow and pressure to match the cardboard size.
☆ Dust removal device, brush and fan can remove paper scraps on the surface of the cardboard, which can be adjusted in sections according to the size of the cardboard.
☆ Self-locking structure is adopted for gap adjustment of paper pull glue silver roller
☆ Host motor start protection device (when the machine is not locked, the host cannot start running).

Groove Department

☆ Single-axis double-knife slotting, box height adjustment adopts internal tooth structure, so that lubrication is not easy to pollute the carton.
☆ The upper knife seat and the lower knife seat are linked by the transmission shaft to keep the upper and lower knives aligned when moving, thus prolonging the life of the tool.
☆ Slot phase and box separation, computer and electric digital control.
☆ Pre-pressure wheel, line pressing wheel, slotted knife seat transverse position, computer and electric digital control.
☆ Slot cutter seat clearance adjustment adopts self-locking structure
☆ Pre-pressure, indentation gap adjustment using self-locking structure.

Printing Department

☆ The anilox roller is equipped with a pneumatic clutch. When the unit participates in printing, it is synchronized with the speed of the main machine. When the unit does not participate, the rotation of the anilox roller can be stopped, so as to reduce the damage of the rubber roller and the anilox roller caused by operation errors, and it is not necessary to use the same speed as the main machine when cleaning separately.
☆ The rubber roller and the screen roller are provided with a fixed speed difference, so that the rubber roller can scrape the ink.
☆ Horizontal phase, computer and electronic digital control, control range ± 10MM.
☆ Automatic switching cleaning device, let the ink recovery more thoroughly.
☆ Automatic reset system after cleaning the printing plate.
☆ The gap adjustment of transfer roller, embossing roller, rubber roller and anilox roller adopts self-locking structure.
☆ Scraper inking system (optional configuration)

Die-cutting department

☆ Rubber pad roller mechanical spiral reversing 50MM swimming horizontal structure
☆ Horizontal phase, computer and electric digital control, control range ± 10MM.
☆ The transfer roller adjustment adopts self-locking structure.
☆ The rubber pad roller compensation is driven by an independent motor to control the speed of the rubber pad roller, and the compensation range is 3m.
☆ The rubber pad roller cuts and repairs the flat structure to keep the surface of the rubber pad flat.