Paper feeding department

☆ The leading edge paper feeding increases the air suction flow, and the paper feeding is more stable and accurate.
☆ Dust removal device, brush and fan can remove paper scraps on the surface of the cardboard, which can be adjusted in sections according to the size of the cardboard.
☆ Pull paper glue roller gap, left and right cardboard position, computer control adjustment.
☆ Host motor start protection device (when the machine is not locked, the host cannot start running).

Groove Department

☆ Single-axis double-knife slotting, box height adjustment adopts internal tooth structure, so that lubrication is not easy to pollute the carton.
☆ The upper knife seat and the lower knife seat are linked by the transmission shaft to keep the upper and lower knives aligned when moving, thus prolonging the life of the tool.
☆ slotting phase and box height, computer and electric digital control.
☆ Pre-pressure, indentation gap adjustment using computer and electric digital control.
☆ The height adjustment of the slotting tool box has an anti-collision protection device, which will not damage the machine.

Vacuum transfer printing section

☆ The anilox roller is equipped with a pneumatic clutch. When the unit participates in printing, it is synchronized with the speed of the main machine. When the unit does not participate in printing, the rotation of the anilox roller can be stopped to reduce the damage of the rubber roller and the anilox roller caused by operation errors. When the well is cleaned separately, it does not need to be at the same speed as the main machine.
☆ The rubber roller and the anilox roller are provided with a fixed speed difference, so that the rubber roller plays the role of scraping ink.
☆ Horizontal phase, computer and electronic digital control, control Fan Guo ± 10MM.
☆ Automatic switching cleaning device, let the ink recovery more thoroughly.
☆ Automatic reset system after cleaning the printing plate.
System on scraper (optional configuration)

Die-cutting department

☆ Rubber pad roller mechanical spiral reversing 50MM swimming horizontal structure.
☆ Horizontal phase, computer and electric digital control, control range ± 10MM.
☆ The rubber pad roller compensation is driven by an independent motor to control the speed of the rubber pad roller, and the compensation range is ± 3mm.
☆ The rubber pad roller cuts and flattens the structure to keep the rubber pad table flat.