Paper feeding department

☆ The leading edge paper feeding increases the air suction flow, and the paper feeding is more stable and accurate.
☆ Dust removal device, brush and fan can remove paper scraps on the surface of the cardboard, which can be adjusted in sections according to the size of the cardboard.
☆ The gap between the paper-pulling rubber roller and the position of the left and right cardboard blocks shall be adjusted by computer control.
☆ Host motor start protection device (when the machine is not locked, the host cannot start running).

Drying Department

☆ Configurable hot air, infrared, ultraviolet (UV) drying system

Vacuum Transfer Printing/Glow

☆ The anilox roller is equipped with a pneumatic clutch. When the unit participates in printing, it is synchronized with the speed of the main machine. When the unit does not participate in printing, the rotation of the anilox roller can be stopped, so as to reduce the damage of the rubber roller and the anilox roller caused by operation errors, and it is not necessary to use the same speed as the main machine when cleaning separately.
☆ The rubber roller and the anilox roller are provided with a fixed speed difference, so that the rubber roller plays the role of scraping ink.
☆ Horizontal phase, computer and electronic digital control, control range of 10MM.
☆ Automatic switching cleaning device, let the ink recovery more thoroughly.
☆ Automatic reset system after cleaning the printing plate.
☆ Scraper inking system (optional configuration).

Die-cutting department

☆ Rubber pad roller mechanical spiral reversing 50MM swimming horizontal structure.
☆ Horizontal phase, computer and electric digital control, control range plus or minus 10MM.
☆ The rubber pad roller compensation is driven by an independent motor to control the speed of the rubber pad roller, and the compensation range is ± 3mm.
☆ Die-cutting servo independent drive.
☆ Rubber pad roller cutting and leveling structure. Keep the surface of the pad flat.